Stumper 240 Stump Grinder Attachment for Mini Skid Steers

Description

Designed to operate on mini skid-steers with a working auxiliary flow rate between 15 GPM and 25 GPM @ 3000+PSI.
This 100% American made product uses a perpendicular cutting wheel that directs a majority of the cutting debris away from the operator, giving the operator a clearer field of vision.  By using the face of the wheel as its main cutting surface, it enables the Stumper 240 will take up to 8 inches per pass!  With its small compact design, weighing only 475 lbs, the Stumper 240 can easily be transported on the same trailer your carrier is being hauled on.
The Stumper 240 uses 14 carbide tipped teeth and a patented raker design to limit the cut depth ensuring the wheel keeps rotating.  A simple cross-over one-way check value eliminates the need for case drain and keeps the wheel spinning in the proper direction. The frontal mounted cutting force regulator, eliminates the need for little movements of your desired carrier, just load the tension and allow the grinder to pull itself through the stump.
Although the majority of the cutting is done with the face of the wheel, select perimeter teeth allow for plunge cutting of surface roots.  Don't let the small size of this unit fool you, it will grind large diameter stumps, and is only restricted by where your carrier will maneuver too.  The Stumper 240 will also grind below-grade as deep as your carrier can reach.
All Stumper Industries products ship with hydraulic hoses, and 1/2 inch FF quick couplers, ready to use right off the pallet.  A standard skid-steer attachment plate comes stock on unit. More product information can be found on our web site.
Because this is an attachment contact Stumper Industries to verify exact fitment and product requirements before you purchase. Exact shipping quotes are also available with your complete address.